Hi, In the process of trying to add a switch via ZTP+ and tried every permutation I can think of to get the switch to pass, but no matter what I do or how simple I set it I always get a 'Device Configuration Failed' At the moment I've pretty much d...
I want to copy a map in the NMS from place a to place b to make a better vioew for me. Can i do ths or most i creat a new map in the NMS.
I have read a number of KBs on this, but they don't seem to apply to us a we don't have the same paths.This article: https://extremeportal.force.com/ExtrArticleDetail?an=000060092 says to edit "/Install_path/NetSight/wildfly/standalone/configuration/...
Hi guys, XMC running release 8.1.5.22 is showing constantly an alarm in EAC "Access Control Lost Contact with Switch" with one stack ERS4900, but this stack is configured with 802.1X and the users have no problems to authenticated, so the stack is a...
I have a combined stack of X670V and X670-G2 , with the X670v ( lets call then G1 ) as master and another G1 as backup . What we have found is that we are not getting any hardware or stacking port alarms from the G2 units , though they are configure...
