ExtremeCloud IQ- Site Engine Management Center - Page 191 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

Trying to use XMC to download summit firmware and getting an error incomplete command

I have an X450G2 24 port test switch and I wanted to see if XMC (Netsight) could push the newer SummitX-22.5.1.7.xos firmware file to it. The firmware is loaded and I attempted to have this pushed to the switch. After about 8 minutes or so of no pr...

Can you discard or undo changes made to the NAC if I don't want to enforce them?

Is it possible to discard saved changes to the NAC prior to enforcing?

XMC will not start smoothly

Below is the log that i am finding it every time. sometimes the netsight server will start via services manager after random attempts to start the server from services manager, but most of the time the server will not start and the page will not open...

Get Network Inventory IPs with Script

I'm working on a Python script to help with some networking tasks. Is there a way that I can get the IPs of my network devices from EMC programatically? Rather than hardcoding the IPs in the script, I'd like to use EMC as the authoritative source f...

XMC 8.1.2.59 ist it possible to integrate a different terminal program e.g. putty

Hi all, is it possible to use a different terminal program e.g. putty out of the XMC web gui? The integrated WebShell is very poor. You can not paste content to the WebShell. RgdsThomas

Top Kudoed Authors

User

Count

74

73

38

17

16

GTM-P2G8KFN