ExtremeCloud IQ- Site Engine Management Center - Page 198 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

port mirror issue

I am trying to put together purview in my lab. I had all my devices discovered by netsight and was doing well, however the sensor would not do any analytics stuff. so, I thought it was due to lack of tunnel and mirror. when I tried to create mirror I...

Extreme Analytics Raw Port Mirror

Hi, This is a very short question, but is it possible to send full port mirror traffic to Extreme Analytics Server instead of N+15 of each flow. There is a possibility in this particular scenario that it would be 3 x 10Gb ports. The question overla...

Netsight MAPS: LLDP, Summits and CISCOs

Hello, everybody! I've added several CISCOs (2960, 3650) and Summits (X430, X440) to Netsight MAPS. All switches are "green" in Devices and connected by SNMP. LLDP is enabled everywhere. I can see from Summits and CISCO each other with show lldp ...

Why Flexviews does not work on Port Element Groups?

As the Title says, Flexviews works very well in the Device Groups in Console, but does not work (interface statistics as an example) in port element Groups, it does not respond.

how do i add a new image to inventory management

I will be looking to update the xos image on my x460-G2-10GE4 and x670v-48x and need to add the image to inventory manager to automate this process. Please advise

Top Kudoed Authors

User

Count

59

52

24

13

GTM-P2G8KFN