Hi Community So I have a question regarding Extreme Management with Extreme Wireless. If I have a NMS Adv 25 with support for 500 AP's. What would happen in NMS if I install more than 500 AP's. Will NMS report an error or just not report on the AP...
Hi Guys, I'm having an odd behavior in a customer running EMC/NetSight 7.1.2.12 (mixed SecureStack and Summit switches). After the NetSight upgrade to 7.1.2.12, during the install of new Summits (replacing the old E1s) we found that a B5 stack, wit...
Hello Community, we have one Netsight appliance and two NAC-Controller in action. Firmware of all is 8.0.2.42. After MAC Authentication is working very well, we have activated 802.1x Authentication on the first switch. At first, it works fine. But ...
Hi, Currently have two of the exactly the same switches and versions modelled into policy, but only one of them is showing up under the Class Of Service TxQ port group, as per below: The 'Add/Remove' button is greyed out, and tried using the Ja...
Hi, Possibly something I am doing but have uploaded the firmware to as per the image below: But when I select the the wireless controller, and go to set an image none will display, even if I tick the box for 'Show All Images' and refresh: An...
