ExtremeCloud IQ- Site Engine Management Center - Page 286 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

SNMP Contact Lost in NetSight but restored on next poll cycle

Hellotogether,ich have a Problem with my Netsigt.The Device in NetSight appears down but comes up on next status poll.I have seen a solution from GTAC:https://extremeportal.force.com/ExtrArticleDetail?an=000074989And here is the Problem. In my Netsig...

Detect lldp neighbors detailed for Windows OS

Hello all, The "lldp neighbors detailed" command works perfectly for all OS Unix like connected to any of my extreme equipments. But for Windows OS it doesn't. It is necessary to do something special in EXOS for detect lldp in Windows equipments? ...

Netsight states that a device is down when its not

Hi there, hopefully someone can help me. I have a 460-G2 that was connected to Netsight, I had to replace the Master switch as it was having POE issues, now another switch is master but its not being seen by Netsight, stating its down, even though i...

NetSight CPU Utilization very high when editing maps

NetSight 7.0.6.27 got a constant cpu load by 50-70% per core when editing maps. It doesn't matter, if it's a wifi-map or a normal device-map. That can't be normal, you need to wait 3-4 minutes, before you can can use the NetSight again. Does anyone ...

Syslog missing in NetSight Console

I have been working on some alarms based on syslog messages. After using the filter and find features to locate information the entire syslog and trap information has disappeared from the console. We are running NetSight ver 7.0.6.27. I can access...

Top Kudoed Authors

User

Count

94

92

41

17

17

GTM-P2G8KFN