ExtremeCloud IQ- Site Engine Management Center - Page 389 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

script on C5

Hi all. Is it possible on a C5 to write a script (or is available a feature on it) that gets down an Eth interface if it feels another Eth interface has gone down and viceversa? Example: I want port 1 to go down if port 19 has gone down. I want port...

Netsight: Configuration upload/download is not supported on this device

I recently purchased Netsight and installed. We are currently running version 6.1.0.171. I thought I was able to setup backups of the configs and policies on each device. When I am in the console and got to "TFTP > Configuration Upload/Download" I ge...

How to backup XOS with Netsight Inventory Manager

How could I backup my XOS X440 v15.7.1.4 with Netsight Inventroy Manager 6.2.0.199. I can't get it to work with SNMPv1 / telnet. IM is set to Script/Controlled by Device Type/Extreme OS - SCP (VR-Default) Thanks, Ron

NetSight 6.1.171 with Extreme Summit switch X430 firmware 15.6 always snmp timeout?

Our customer use NetSight 6.1.171 with Extreme Summit switch X430 firmware 15.3, and NetSight sometimes shows snmp timeout error. I ask the problem on HUB, and got it will resolve with NetSight 6.2 and XOS 15.4 or later. Since the NetSight 6.2 doe...

Summit400 Configuration Backup NetSight

We still have a few straggling non XOS devices in our network. I'd like to use NetSight to back them up. Inventory Manager throws and error "Cannot perform action with MIB type = UNKNOWN." so I tried changing the firmware and configuration in MIB and...

Top Kudoed Authors

User

Count

77

75

38

17

16

GTM-P2G8KFN