Hello, we have one customer that has an Out-of-Band Management with completely separated switches. All productive switches are connected to those Mgmt-Network-Switches via their dedicated Mgmt-Port. (All switches are Summit Switches with FW 30.x) I...
Hi There, Hoping someone can help me explain the behaviour below and say either if it is normal or a means to correct it. It seems that every hour a re-authentication of 802.1x is triggered, that process initially introduces a MAC auth that tempora...
Hello, I was wondering where I would find some design guides for XMC so we can build a redundant setup for two sites. Option 1 1 x XMC VM 2 x NAC Control - one on each site1 x Anayliticswhat happens when the site goes down where XMC and Anal...
Hi, I would like to create a rule that matches on MAC auth, with a End-System and Device Type group set. There is an initial issue with doing that in that the MAC auth takes place before the end-system has had a chance to get an IP address from the...
Hello, everyone, I have an X465 as CB and a V400 as BE. Everything works fine, only in the XMC there is no link between the two devices. Additionally the status is defined as "Unknown". Is there any trick to actively trigger the link conn...
