XMC - WLC SNMP mistake
Good evening,On XMC I try to connect a WLC C35 V10.51.08 with SNMP V3. But I receive this error. and on XMC I can not receive information about WLC. Anyone can help me ? Thanks in advance Giuseppe
Forum Posts
Netflow, Sflow, IPfix support for none Extreme Devices
Have an EXOS Extreme based network, although it is predominantly on older technology like BD8K, or G1’s that does not support telemetry. The network is generally made up of lots of small remote sites that use Cisco, Juniper and Palo Alto firewalls a...
[XMC] Extreme Management Center™ 8.4.4.26 Maintenance Release
XMC 8.4.4.26 is now available on the Extreme Portal Please review the Release Notes for any new features, changes, or corrections in this release. The Release Notes are posted here: https://documentation.extremenetworks.com/release_notes/Net...
I am receiving some alerts stating that Switch UP/Down in netsight , getting the alerts from the switch. But I am able to ping the switch and switch is up so what we need to do in this case please suggest me.
I am receiving some alerts stating that Switch UP/Down in netsight , getting the alerts from the switch. But I am able to ping the switch and switch is up so what we need to do in this case please suggest me.
Resolved! NAC unlicensed after upgrade to 8.4.3.24
Hello, we have three virtual Access Control Engines: two with a NAC-V-20-License and the third was licensed by our NMS Advanced license. After upgrade to 8.4.3.24 today, the Engine uses the NMS Advanced license shows as unlicensed and I can´t Enfor...
