Extreme Networks

Bartek · 11-20-2023

Hi,I have on customer site Palo Alto 5200 firewall (PAN OS 10.2) connected to NMS using SNMP V3 (Auth/Priv: SHA/AES) with loaded custom Palo Alto SNMP MIBS for PAN OS 10.2 in MyMibs folder.In "Port Tree" view I see only a few ports but when I switch ...

Bartek · 04-28-2022

Hi,Environment:a) 2 legacy IdentiFi V2110 in HA mode were replaced to 2 XCC VE6120 Medium 05.46.05.0002 in HA mode (appliance license + AP subscriptions LIC-XCC-ORC already activated)b) Extreme Management Center migrated to XIQ-SE 22.3.10.74Everythin...

Bartek · 07-01-2020

Hi, Is there any way to prepare a custom translation of GIM? (or do you have in plan to add Polish locale). In NAC CP you can do such stuff out-of-the-box.

Bartek · 03-30-2020

Hi, As I see in the release notes of XCA 4.76.01 AP310i/e are not listed. Do you know when those APs will be supported by XCA?

Bartek · 02-08-2018

Hi Everyone,I have NMS+NAC version 8.0.5.18 with environment where almost all end systems are using static IP addresses (there is no DHCP service enabled) and most of them are not supporting 802.1x protocol (so I can't use RADIUS Accounting packets t...

Bartek

Apple devices have some issues with WPA3 and I've heard about it from Extreme SE. From my in-field tests on customer site with AP305C (mostly macs) WPA2 with 802.11w is fine (tested with MacBook Air 2017 and new M1/M2) but be cautious with older dev...

Bartek

Important question - do you see authentication requests in Event Log for NPS service? "Client Denied by Security" looks like problems with STA associations

Bartek

Hi,It looks that you have this VLAN 2005 configured statically on this port. To confirm show me result for command:show vlan ports <YOUR_PORT>If you find this VLAN in port settings then just remove it. It's common practice to configure statically qua...

Bartek

Hi,I've never faced such problems but you it would be helpful to share some details of your network topology. You can also generate tech support. Your problem description looks like a typical network loop but without any details it's really hard to t...

Bartek

Hi,EAC is using only MAC authentication from the switch side (Web-based auth in switch is not required). Your just need to configure in "Unregistered" role in Policy Manager default action to "URL Redirection" (works for EXOS/Switch Engine and on-pre...

Extreme Networks

User Statistics

User Activity

Device Port Tree view missing ports

XCC onboard on XIQ-SE

ExtremeControl Guest & IoT Manager custom translation

Question about planned XCA support for AP310i/e models

NAC and hosts with static IP issue

Re: Apple devices not bringing up certificate when connecting via WIFI using Extreme AP 305C

Re: Apple devices not bringing up certificate when connecting via WIFI using Extreme AP 305C

Re: Port-based Web Guest Access in ExtremeControl

Re: Problems with Intel Xeon Server and Extreme Networks ExtremeSwitching X460-G2: Any Advice?

Re: Port-based Web Guest Access in ExtremeControl