Extreme Analytics For EXOS, VOSS and SLX

[Andre_Brits_Kan]

Hi Community

In the past couple of years we have deployed a few Purview installation, using S series switches.
The deployment guides provided with Purview was great!!.
It had detailed information around deployment options with S series switches, listing the exact commands ect for each deployment option.
You could have basically just followed this deployment guide line for line and all would be working in 5 to 10 minutes.

I recently wanted to start testing Extreme Analytics (Purview) with some EXOS switches, VOSS Switcthes in my LAB.
Looking at the config guides ect we see very little to no documentation on the setup required for EXOS, VOSS or even SLX.

Does Extreme have an "Extreme Analytics" (Purview) deployment guide that covers all the different switches?

And if not it would be very usefull for all extreme users to have a document similar to the Purview/S Series deployment guide, covering the different switch series.

Your comments on this would be welcome

[Antonio_Opromol]

Hi Tomasz, I've found the flow limits on the Realease notes.
Thanks

[Tomasz]

Hi Antonio,

EXOS devices since 22.4 (all currently on-sale).
VOSS since 7.1.
SLX9140 probably is en route with that.
All above with telemetry (I hate that name, I get flashbacks about some nasty Windows 10 processes).
You might find this useful: https://emc.extremenetworks.com/content/common/releasenotes/extended_firmware_support_8.2.htm

Hope that helps,
Tomasz

[Antonio_Opromol]

Hi, is there an update list of all switches model EXOS, VOSS, SLX that support analytics based on the latest releases of software (IPFIX, netflow\N mirror, application telemetry)?
And is there a document for the limits regarding analytics of the different platform?

[Zdeněk_Pala]

For VOSS (VSP) you will need XMC version 8.2
For EXOS you can use 8.1