cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

How Configuring Events and Traps in Switches Extreme XOS

How Configuring Events and Traps in Switches Extreme XOS

Jairo_Rojas_Her
New Contributor II
I need to configure events in the logs of the switch and also that these are replicated to NetSight as I set these alerts on Switch Extreme and that can be displayed in NetSight?

61321db3e9a04258a23f4f78ae29d934_RackMultipart20160608-109449-1p6pmzf-ELRP_SNMP_inline.jpg


13 REPLIES 13

Jairo_Rojas_Her
New Contributor II

b047a3a6ea364505830545001d8b16fe_RackMultipart20160609-63608-3s0qlm-SNMPV3_CONFIG3_inline.jpg


b047a3a6ea364505830545001d8b16fe_RackMultipart20160609-1102-dh35db-SNMPV3_CONFIG4_inline.jpg


b047a3a6ea364505830545001d8b16fe_RackMultipart20160609-60685-169ue2i-SNMPV3_CONFIG5_inline.jpg


b047a3a6ea364505830545001d8b16fe_RackMultipart20160609-26124-173acbw-SNMPV3_CONFIG6_inline.jpg


Tony_Thornton
Extreme Employee
There may be some misunderstanding. At this point since adding the switch as a trap receiver did not work, I am looking to confirm the SNMP settings, which is done in Console > Tools > Authorization / Device Access, not the trap receiver settings as shown in your latest screenshot.

Jairo_Rojas_Her
New Contributor II
Shared the configuration!!

cedfd73ea60b4dd082cb2e4343595c13_RackMultipart20160609-62598-15bdm7h-NETSIGHT_SNMP_TRAPS_ERROR4_inline.jpg


Tony_Thornton
Extreme Employee
It looks like the engine id matches. Does the SNMP community and user information configured on the switch match the SNMP Device Access Profile used in NetSight?

Go to Console > Tools > Authorization/Device Access > click on Profiles/Credentials tab



Do the Access Profile credentials (Read / Write) in NetSight you are using to communicate with the switch match the SNMP credentials configured on the switch? You can double click on a profile to view or edit the read / write credentials including passwords.
GTM-P2G8KFN