cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

NAC does not show the name of APs

NAC does not show the name of APs

Husam
New Contributor II
I have a setup of wireless controller C5210 v09.21.06.0006 integrated with NAC IA-A-300 for dot1.x authentication only without assessment. I installed this NAC 3 weeks ago. Till yesterday the NAC showed the AP name that the End-system connected to as well as the MAC OUI Vendor of each end-system. But today this NAC does not show any of that information. It show only the MAC address of APs along the SSID name.

Is there any advice!

Thanks in advance.
Husam
13 REPLIES 13

Also be sure that Wireless Controller the Radius TLVs are configured on each of the Wlan Services. AP name is the one you want.

919c0691dd6e4474b0a3d071bcfb557e_RackMultipart20160428-94047-1fmp2a5-RadiusTLV_inline.png


Is the ones working using a different firmware?
Did you try a nacctl restart on the NAC?

Husam
New Contributor II

32295914ecb34fe98cd799b64fd48d69_RackMultipart20160428-103652-1qkl38z-2016-04-28_15-11-54_inline.png


Husam
New Contributor II
Hi,

NAC version is 5.0.0.232 it is appliance
Netsight version is 6.3.0.162. it is windows based

Thanks
Husam
GTM-P2G8KFN