Netsight don't report a defect fan of a X670

[JohanHendrikx]

Netsight don't report a defect fan of a X670 (firmware 16.1.2.14)

In the log of the switch I noticed a defect fan.

If I query the switch with the MIB tools I see that all fans are operational true.

But log file:

Switch, Code 5: Fan tray 3, fan #5, has failed. RPM (0) is out of operating range which is at or above 2000.

[JohanHendrikx]

It running on the latest firmware (16.1.2.14) or is there an other one?

[OscarK]

Hello Johan,

there are quite some known issue's with fan traps not being send, I wonder if you upgrade to the lastest EXOS version if it does report the right status ?

[JohanHendrikx]

Hello Oscar,

Yes, fan #5 show 0 rpm. But I checked the traps Netsight received and there was no trap send by the switch