cancel
Showing results for 
Search instead for 
Did you mean: 

VOSS Radius Reachability Check with Dummy Requests - XIQ-SE

VOSS Radius Reachability Check with Dummy Requests - XIQ-SE

joshross28
New Contributor II

We are bombarded with these rejected events. This is working as designed, correct? All of our VOSS switches are set to check reachability every 3 minutes. It seems odd that the check is performed with a rejection, maybe that's standard procedure.

Is Status-Server mode any more efficient (RFC 5997)?

 

joshross28_0-1698762195806.png

 

1 ACCEPTED SOLUTION

Ryan_Yacobucci
Extreme Employee

Hello,

Check out: 
https://extreme-networks.my.site.com/ExtrArticleDetail?an=000112893

 

Also, consider using the reachability checks to reduce load on XIQ-SE if large numbers of healthchecks are being sent: 

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000100006

 

Thanks
-Ryan

View solution in original post

7 REPLIES 7

Robert_Haynes
Extreme Employee

Also check https://extreme-networks.my.site.com/ExtrArticleDetail?an=000100006 - there is a property override available in Control to handle reachability requests like this.

 

 

... and of course Mr Yacobucci already provided that earlier 😉

Ryan_Yacobucci
Extreme Employee

Hello,

Check out: 
https://extreme-networks.my.site.com/ExtrArticleDetail?an=000112893

 

Also, consider using the reachability checks to reduce load on XIQ-SE if large numbers of healthchecks are being sent: 

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000100006

 

Thanks
-Ryan

OscarK
Extreme Employee

Yes, this is normal, for reachability it does not matter if a reject or accept is received, as long as a radius response is received.

You could create a seperate rule to just accept this and not see the rejects.

server-status might be a more silent method

GTM-P2G8KFN