- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-04-2020 03:55 PM
Hello,
On many different VHMs of cloud EIQs (from different customers) I often have a “Device Update Failed” results. I have tested with same results:
- complete upload
- delta upload
- update firmware only
- complete upload + update firmware
- delta upload + update firmware
Any known issue by now?
To be corrected?
I openned a case but no feedback by now.
Regards,
Christophe
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-10-2020 07:37 AM
Hi Ash,
The issue was on EIQ’s side and has need solved last Friday, thanks for your advise!
Regards,
Christophe
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-10-2020 07:37 AM
Hi Ash,
The issue was on EIQ’s side and has need solved last Friday, thanks for your advise!
Regards,
Christophe
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-07-2020 03:17 PM
If you hover over the error, or go to the alarms, there should be more information as to why the device update failed. If you’re able to provide this we can narrow it down 🙂
Generally the error is caused by configuration it doesn’t like (i.e. it can’t get back to Cloud IQ after it has been pushed) or a firewall preventing the update. A rarer issue is that you’ll need to reboot the AP first (at a physical or switch level) before it’ll take the update.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-07-2020 10:14 AM
Hello,
I still have issue, does any others experienced the same?
Regards,
Christophe