XIQ AP - MGT VLAN & NATIVE VLAN

[EF]

Hi Team,

Reading this:

How To: XIQ - How to configure the management and native vlan IDs on an ExtremeCloud AP from CLI | E...

Im confused about the use on the MGT VLAN and Native VLAN, I allways configured them on VLAN 1 so in the SW port set as untaged/native the VLAN the desired AP MGT VLAN.

If I configure the MGT VLAN and NATIVE VLAN with diferentes values, What is the behavior of the AP? What is the correct configuration on SW port? Perhaps the MGT VLAN traffic is tagged and the NATIVE VLAN is for other use as SSID VLAN?

Regards

EF

[Bartek · Accepted solution]

According to my knowledge:

• Management VLAN: VLAN for Areohive protocols (AMRP, ANXP, INXP, DXNP, ACSP) SSH, SNMP and other management traffic,
• Native VLAN: VLAN for untagged traffic.

If you configure MGMT VLAN with different value than Native VLAN then Management VLAN is tagged