ExtremeSwitching (EOS) - Page 103 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

Bad checksum reading the chassis type from Network Address (NAP) chip.

I have some problem with one of my DFE Platinium module 7G4202-30 for N series. During boot up process I get following messaged while connected to the console port: A device within this chassis has encountered a hardware failure. Bad checksum readi...

x440-24t vs c5g124-24 for edge router

Hi, We save S4 chaisis as core. And using one C5G124-24 per building as edge routers. And A4H series for access switches. Our local partner said as a result of Extreme/Enterasys merge we should invest in summit X series instead of enterasys gears. ...

Firmware updates when to expect a reboot?

I have a couple of S4 and a stack of B5's in my environment. I basically want to know when I should expect a reboot of the device when issuing firmware.

Basic ACL Help with EOS on a SSA 150

Hello, due to a Company policy i have to use a SSA 150 as a central Routing Switching System with NAT & Basic Firewall. I have created Static & Dynamic Nat Rules and all works fine .. now i have to secure the Server vlan with an ACL. I ́m not so f...

S4 DHCP Bindings

Hi Guys, on a S4 Switch i have a dhcp pool enabled on a vlan. when i do "show ip dhcp binding" there are a lot of addresses with status "blocked" without any MACs associated. Does anybody know what that exactly means or when did this status appears...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN