ExtremeSwitching (EOS) - Page 107 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

getting an snmp alert 1.3.6.1.6.3.1.1.5.5 authentication trap failure on s series

getting an snmp alert 1.3.6.1.6.3.1.1.5.5 authenication trap failure on s series, is there any way to view in the logging buffer as we want the source ip address of the offending SNMP device

Configuration DHCP option ascii on Enterays B3

Hi, I have an issue with Enterasys B3 on 6.61.13.0006 firmware. I have to use an ascii option like that : set dhcp pool phone option 130 ascii "MITEL IP PHONE" but after reboot the option has been deleted, i think because we have a "space" in the as...

Automating config backups for B5-series & K6 switches

We have 17 B5-series switches & 1 K6 core switch and have been backing them up manually using the CLI. What are my options for automating these backups within the Enterasys/Extreme Networks set of solutions? Is that what NetSight does? What about ...

spantree packet error

Hi all. We found this error on our S3, while we were watching its logs. Anybody knows what does it mean? <165>May 15 09:51:03 10.X.XXX.X Spantree[1]Packet error on Port = ge.1.XX Data Length = 35017 DSAP = 0x02 SSAP = 0x07 BPDU Protocol I...

load mib to A2H124

Hi community, we have a switch A2H124-48P which is not sending snmp traps when a cable is unplugged. I used snmpwalk and found that the O.I.D. .1.3.6.1.6.3.1.1.5.3 is not responding (IF-MIB). This OID is responsible for sending the trap. I have see...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN