ExtremeSwitching (EOS)
Questions and discussions about EOS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Monitor for SFP Alarm State

I found an SFP in one of my switches that showed an Alarm State of "Low Alarm".  We replaced the SFP and fixed out issue.I would like to monitor for the Alarm State on other SFPs now.  I have been searching through the EOS MIB files, but can not find...

Michael_M by New Contributor II
  • 1351 Views
  • 1 replies
  • 0 kudos

firmware upgrade x440g2

we have a stacked switch, x440G2 current version is 21.1.3.7For us to upgrade to the latest version. 32.3 do we need to follow any certain upgrade path? or we can go directly?Thanks

edspare by New Contributor
  • 1372 Views
  • 0 replies
  • 0 kudos

Create syslog event for testing

I cant seem to find a CLI command to create a syslog event to see if it is getting reported to my XIQ-SE server properly or not. Im sure there has to be a command to create a "Test" event\message that would be sent to a syslog server?

Michael_M by New Contributor II
  • 3815 Views
  • 2 replies
  • 0 kudos
GTM-P2G8KFN