ExtremeSwitching (EOS) - Page 2 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

Trunking between Cisco switch and Extreme Networks switch

In order to integrate an Extreme Networks switch into our network, the core of which is a Cisco switch, we set up a lab with the following configurations:On Cisco switchvlan 2name Usersexitvlan 4name Serversexitint vlan2ip add 10.10.10.1 255.255.255....

Q-Sys IGMP Multicast Videostrem causes green screen when switching to a camera for the first time

Hello Community,one of our customers is using a videosystem from QSC which consits of NV32 videostreaming devices and Q-SYS PTZ-Cameras. The system is based on IGMP Multicast and is working properly exept one problem. When the PTZ-Cameras start their...

Deny DHCP on certain ports

I have an extreme switch that is connected back to a Cisco core. switch that does all the routing. Users attached to the Extreme switch are able to utilize DHCP. However, I now have another "unmanaged" switch that sits off port 22 on this Extreme S...

Heads Up- EOS Firmware to be Removed from the Extreme Portal April 2nd, 2024

Due to third party software restrictions, as of April 2, 2024, Extreme Networks will remove all EOS software revisions noted in the ‘Software Affected’ section below from the Extreme Support Portal and will no longer distribute any software revisions...

STP Configuration Question

Hi All, I am new to Extreme switching and currently looking to replace existing ICX6450-48P Edge switches with the 5420 models and need to know best practice for configuring these Edge switches with STP before connecting them to the network with othe...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN