I use Enterasys switches A4H124-24FX what is the difference between firmware chass 06.61.06.0009 and chassis 06.81.02.0007 can they work smoothly together Thanks
After hard coding a port on my S-Series S1 switch the port will not work. I have hard coded the port using the following commands in order; set port duplex ge.1.46 full, set port speed ge.1.46 1000, set port negotiation ge.1.46 disable. I have tried ...
Hello together,
I'm looking for the newest Firmware for my Enterasys C3G124-24P/48P...
Badly they are End of life and so I can't get any from our support....
Is there someone who got them still on there Hard Drive and would share it with me?
Thank...
I have a switch with the following config:
#spantree
set spantree mstcfgid cfgname 'SP4' rev 1
set spantree msti sid 2 create
set spantree msti sid 3 create
set spantree msti sid 4 create
set spantree msti sid 5 create
set spantree mstmap 9 sid 5
set...
Hi all,
what happens if an S-Series switch receives tagged a RSTP BPDU on a port?
Standard conforming spanning tree BPDUs are never tagged with a VLAN ID, but some devices add a .1Q tag with VLAN ID to otherwise standard BPDUs (e.g. Alcatel 1x1 mod...
