Trunk between switch Extreme Networks and Cisco switch
Hi CommunityCan you help me configure a trunk between an Extreme Network switch and a Cisco switch?Please it's urgent so any help will be welcome
Forum Posts
Resolved! Connection problem
We've purchased an Extreme Networks 5420F-24P switch and are trying to connect to the interface via putty or MobaXterm with the configuration indicated in the Guide:Baud rate: 9600Data Bits: 8Stop bit: 1Parity: noneFlow control: noneBut it dont work....
Trunking between Cisco switch and Extreme Networks switch
In order to integrate an Extreme Networks switch into our network, the core of which is a Cisco switch, we set up a lab with the following configurations:On Cisco switchvlan 2name Usersexitvlan 4name Serversexitint vlan2ip add 10.10.10.1 255.255.255....
Q-Sys IGMP Multicast Videostrem causes green screen when switching to a camera for the first time
Hello Community,one of our customers is using a videosystem from QSC which consits of NV32 videostreaming devices and Q-SYS PTZ-Cameras. The system is based on IGMP Multicast and is working properly exept one problem. When the PTZ-Cameras start their...
Deny DHCP on certain ports
I have an extreme switch that is connected back to a Cisco core. switch that does all the routing. Users attached to the Extreme switch are able to utilize DHCP. However, I now have another "unmanaged" switch that sits off port 22 on this Extreme S...
