ExtremeSwitching (EOS) - Page 59 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

S3 ACLs vs CISCO ACLs ... it seems something is not working as expected ...

I all ... we're trying to migrate a CISCO configuration to a S3 ... everything is going fine about L2 and L3, but we're facing some issues with ACLs ... we "copied" and "paste" from CISCO to the S3, changing some little stuff like protocol names a...

EOS - S-Series: Sending Trap if broadcast suppression limit is reached

Is it possible that s-series (or K or 7100) are send an traps if the broadcast supression threshold value is reached ? I do that with all my EXOS stuff and what using the same mechanism with EOS. Regards

snmpset to clear ARP table entry on the s4 Enterasys SW

I am trying to remotely clear one entry in a ARP table of the s4 Enterasys SW using the following command snmpset -v2c -c 1.3.6.1.2.1.4.22.1.4.108.204.136.234 i 2, but it shows an error: "Error in packet." Reason: commitFailed. It works with othe...

Enterasys S-series >> "Access control for the authentication header protocol is not supported."

Hi, we need to convert an access-list from a Cisco to the new server router Enterasys S-series. On the cisco I had the line: "permit ahp any any" I see that Enterasys S-series doesn't recognize the name "ahp", but I can still enable protocolo numb...

127-Bit IPv6 Prefixes on Inter-Router Links with EOS (S-Series)?

Hi, has anybody tried to implement /127 IPv6 transport networks with S-Series switches? Is some special configuration necessary for this to work? The S-Series release notes list RFC 6164, Using 127-Bit IPv6 Prefixes on Inter-Router Links, as suppor...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN