ExtremeSwitching (EOS) - Page 60 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

A4H124-48 loop protection.

Hi, Today I was configuring dhcpsnooping on A4H124-48. When I run "show neighbors" I was surprised to see that the switch is displaying it as a neighbor device on two of its ports. ARHAVI_MYO_IDARI_A4-48(su)->show neighbors Port Device ID ...

initial setup x250e

I just got hold of a few extreme x250e and I would like to use them to power a camera system that I have ( I am a cisco guy but just got a client that has extreme switches so I also need to familiarize myself with the switches) The ports seem to be o...

S3 ACLs vs CISCO ACLs ... it seems something is not working as expected ...

I all ... we're trying to migrate a CISCO configuration to a S3 ... everything is going fine about L2 and L3, but we're facing some issues with ACLs ... we "copied" and "paste" from CISCO to the S3, changing some little stuff like protocol names a...

EOS - S-Series: Sending Trap if broadcast suppression limit is reached

Is it possible that s-series (or K or 7100) are send an traps if the broadcast supression threshold value is reached ? I do that with all my EXOS stuff and what using the same mechanism with EOS. Regards

snmpset to clear ARP table entry on the s4 Enterasys SW

I am trying to remotely clear one entry in a ARP table of the s4 Enterasys SW using the following command snmpset -v2c -c 1.3.6.1.2.1.4.22.1.4.108.204.136.234 i 2, but it shows an error: "Error in packet." Reason: commitFailed. It works with othe...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN