I am trying to remotely clear one entry in a ARP table of the s4 Enterasys SW using the following command snmpset -v2c -c 1.3.6.1.2.1.4.22.1.4.108.204.136.234 i 2, but it shows an error: "Error in packet." Reason: commitFailed. It works with othe...
Hi, we need to convert an access-list from a Cisco to the new server router Enterasys S-series. On the cisco I had the line: "permit ahp any any" I see that Enterasys S-series doesn't recognize the name "ahp", but I can still enable protocolo numb...
Hi, has anybody tried to implement /127 IPv6 transport networks with S-Series switches? Is some special configuration necessary for this to work? The S-Series release notes list RFC 6164, Using 127-Bit IPv6 Prefixes on Inter-Router Links, as suppor...
Hi I am busy playing with VXLAN between two S series switches in my LAB and have some problems. The two S series switches connect to each other across a L3 routed network. I have configured the VXLAN tunnel and that seems to be working fine. VXL...
I enabled HostDos on the S6 chassis switch to drop SYN FLOOD packets over 1000pps threshold, but these packets still bypass the switch as they hit the firewall LAN interface - I am running the SYN Flood test locally. I checked the logs and there were...
