ExtremeSwitching (EOS)
Questions and discussions about EOS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

IGMPv2 querier election issue

Hello,I'm new to the multicast protocol. On my switches, the igmp snooping is enabled per-port, version 2, on all of them. I have several vlans configured on the switches.I set on one switch an IP on vlan29, and I have an IP on the management vlan. S...

Chrisw29 by New Contributor
  • 1378 Views
  • 2 replies
  • 0 kudos

Converting Avaya Config to Extreme Config

Hi All,I am new to networking however l have been looking through documentation trying to find a good resource to help translate configs (Avaya Config to Extreme Config EXOS): ! *** Interface ***!interface FastEthernet ALLauto-negotiation-advertiseme...

LOCAL LOGIN NOT WORKING

Hi Everyone,I configured radius server in my X435-24T-4S switch .After radius configuration only primary radius is working,switch is not sending request to secondary radius server as well local account login also not working after radius configuratio...

NN_QA by New Contributor
  • 411 Views
  • 0 replies
  • 0 kudos

CLI banner is shown twice when logging in thru SSH

Hello, I am struggling with this simple thing. The CLI banner is showing twice when I log in, I am using tacacs for Authentication but not sure that is what is causing it. System Description............................. Extreme 220-Series 48GE PoE+, ...

g748437 by New Contributor
  • 829 Views
  • 1 replies
  • 0 kudos
GTM-P2G8KFN