ExtremeSwitching (EOS) - Page 70 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

7100 series LACP ports not dormant after connecting to server NIC team

Hi, We are trying to configure a lag on a 7100 series switch. We have good experience with creating lags between switches, and ESXi hosts. However, this is the first time we have done this using Microsoft 2012 R2 NIC teaming. On the server, I ...

Config Example LAG between C3 stack and summit X450-g2 MLAG

Hello All Does anyone have a good and stable config example for me to set up a lag of 4Gb (4x1Gb) between a C3 stack of 4 units and a MLag setup of 2 Summit X450-G2 switches? The Mlag peering config of the X450-G2 is al ready running and stable, b...

c3 factory default does not delete saved configs or log files

setting c3 to factory defaults does not delete saved configs or log files. Is there an easier way to delete multiple files other than cli --'delete configs/xxxxxxxxxxxxxx --- going to surplus these switches and want them cleaned thnks in advance w...

Port Protected Mode on 7100-Series?

Hi, on SecureStack switches, the Port Protected Mode was available. It prevented The Protected Port feature is used to prevent ports from forwarding traffic to each other, even when they are on the same VLAN. Ports may be designated as either protec...

Disconnecting B5 copper uplink

So I've got this really bizarre problem so please bear with me as I explain.... Previous environment: 4 buildings with multiple B5-series switches/stacks. I stack in each building is/was the MDF connected by 10G GBIC fiber to a K6 core. All...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN