ExtremeSwitching (EOS) - Page 69 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

7100-Series / ACL / Access Control List / Limitations

We want to transfer a large ACL from a DFE module (with Advanced Licence) to an 7100 (about 300 entries). We can only enter 171 lines, then we're done. The "show limits" command displays: Chassis limits: Application Limit ...

7100-Series / ACL / Access Control List Limitations

We try to transfer an ACL from a DFE module (with Advanced Licence) to an 7100 (about 300 entries). We can only enter 180 lines, then we're done. TOR(rw-cfg-ext-acl-160)->permit tcp host 192.168.60.254 any eq 2222 Apply access-group failed: Insuffic...

Port channel between Server and Extreme Summit Switch

I need to setup a port channel between two VMware environment and extreme summit switch X460. I have try to configure this and it break the connection on extreme but when I move back the cables to cisco everything is working fine. I want...

Tagged and untagged traffic in same VLAN on same port

Hey, Is it possible to have tagged and untagged egress on a single port and in the same VLAN? Apparently not. (The switch sets either tagged or untagged egress.) Is there a workaround? (like assigning the VLAN once untagged and once tagged to a fix...

How to migrate configuration from EOS to EXOS??

I need to configure my x440-g2 with exos to use in my network. all switches that i have are c5 and b5 witch eos ... now i need to translate eos config file to exos.... and this is my base config to migrate: set ip address 172.16.0.XXX mask 255.255....

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN