ExtremeSwitching (EOS) - Page 82 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

Extend VXLAN from OSPF to Static/Direct Connect Routed Network - L3 VXLAN Gateway needed?

We have a customer that would like to use VXLAN to extend some VLANs across their network. They have a mix of XOS and EOS equipment, X670-G2s, S4, N3/N7, etc. While working to configure VXLAN for their request, I realized that one VTEP will be in t...

Why do I get different output from the show vlan and the show config commands?

I'm trying to get a hold of my new system and coming from a Cisco background it can be kind of difficult at times. This is especially true considering the differences in the way VLANs are handled between Extreme/Enterasys and Cisco. The following i...

VoIP phone causing Loop - Disable port with Duplicate MAC Address

Customer has VoIP Phones. Users will plug both ports into wall jacks causing a loop. Looking for solution

S4 "show spantree stats active" behavior

We are stetting up two s4 cores with a 4 x 1Gb lag between the two cores. We are using single instance rstp for spanning tree. core 1 priority 4096 and core 2 priority 8192. When the two cores come up, the lag negotiates and we observe the follo...

DB9 Pinout of serial cable that ships with C5 Series switch

Hi All, I'm looking for the pinout of the DB9 to DB9 cable comes with the C5 series switches? Any help would be greatly appreciated. Thanks, -Rich P.

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN