ExtremeSwitching (EOS)
Questions and discussions about EOS
cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Forum Posts

S4 "show spantree stats active" behavior

We are stetting up two s4 cores with a 4 x 1Gb lag between the two cores. We are using single instance rstp for spanning tree. core 1 priority 4096 and core 2 priority 8192. When the two cores come up, the lag negotiates and we observe the follo...

Tino by New Contributor III
  • 3228 Views
  • 3 replies
  • 0 kudos

eos to xos stp conversion and vlan loops

We are replacing our enterasys c2,c3 and c5 fleet with x460-g2's and we seem to be creating a lot of loops when it comes to configuring vlan's on these switches. We have 2 interconnected S4 cores (no chasis bonding) with all the edge switches fibere...

Tino by New Contributor III
  • 3395 Views
  • 6 replies
  • 0 kudos

Lag configuration question

I have an S4 (main campus) with a lag on one end and I have three stacked B5's (remote campus) on the other. They are connected via 1 mile long fiber. Complaint from end user's has been poor internet speeds at the remote campus. They are on a VLAN...

GTM-P2G8KFN