If I enable Jumbo frames on a top of the rack (server farm) and 'above' it on a 'core' switch, will it effect devices that might not support jumbo frames?
Currently i am converting an existing configuration from a legacy N7 device to a current X670 switch.
Converting the EOS route-based policy to EXOS route-based policy i need some help.
Existing EOS route-map:
ip access-list extended redirectACL
...
Hi,
we have installed some months ago at our University Campus an Enterasys S8 as a core router.
With time, the configuration became quite lenghty, and having a tool to filter out the configuration would be useful.
We are running this version:
S8...
After firmware update, I cannot boot the unit successfully anymore!I'm trying to reactivate two A2H124-24 units, which had been already dismantled, but shall be used for a charity project here now.Setting from the previous owners did not let us simpl...
I have a severa; BD8810 access-layer switches connect to a Summit distribution switch. All devices have LLDP enabled on their uplink ports such as:
8810 switch:
enable lldp port 5:1
configure lldp port 5:1 advertise system-name
Summit switch
...
