ExtremeSwitching (EOS) - Page 92 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

[Enterasys S8] cannot grep/find

Hi, we have installed some months ago at our University Campus an Enterasys S8 as a core router. With time, the configuration became quite lenghty, and having a tool to filter out the configuration would be useful. We are running this version: S8...

Scrolls "soc_schan_op: operation timed out" Errors and does not Fully Boot

After firmware update, I cannot boot the unit successfully anymore!I'm trying to reactivate two A2H124-24 units, which had been already dismantled, but shall be used for a charity project here now.Setting from the previous owners did not let us simpl...

How to get a switch to show 'system-name' of connected device when issuing "show LLDP neighbors"?

I have a severa; BD8810 access-layer switches connect to a Summit distribution switch. All devices have LLDP enabled on their uplink ports such as: 8810 switch: enable lldp port 5:1 configure lldp port 5:1 advertise system-name Summit switch ...

broadcast limiting

Hi, When I limit broadcast with "set port broadcast fe.1.1 200" and the port receives more then 200 pps, what happens than? Does the switch drop the broadcast packages greater than 200 pps? If so, will the "discard" counter increase or it will drop ...

How to interpret the vlaues of ActorAdminState and ActorOperState in show port lacp port ge.x.xx status detail ?

Hi Gents, I get below out put for show port lacp port ge.x.xx status detail in EOS. How to interprit "-----GLA" "--DCSGLA", "-----GSA", "--DCSGLA" ? Global Link Aggregation state : Enabled Port Instance: ge.2.48 Port enable stat...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN