ExtremeSwitching (ERS) - Page 15 - Extreme Networks

ExtremeSwitching (ERS)

Questions and discussions about ERS

Forum Posts

Sorted by:

Start a conversation

Resolved! How to exclude and release IP addresses from DHCP in ERS ?

I currently have an ERS 3526T with Software Version v5.3.12.009,I can't find a way to exclude and release a DHCP assigned IP address.is it possible to exclude and release IP addresses from DHCP? How do I do it? Thank you in advance for your help

ERS 4826 GTS-PWR+ | Agent Code Checksum Failed

One of our customers had their legacy stack’s base unit fail, and I replaced the failed unit with a spare one that they had on site. The “base” switch at the back is on, and the stacking cables in the rear are as they were on the failed unit. I power...

Resolved! Factory Reset GTS4950-PWR+

Hello all. Well I goofed up in uploading a config to the GTS4950 and now I cannot log back in via the console port. Something broke (that is, was configured wrong) when the Console access user name and password were entered. I have tried using the ...

Resolved! DHCP issues on ERS switches

I have been experiencing some issues on some networks we have set up. Both have similar codes running them and so i presume the issues are equally similar also. i have noticed DHCP relay is not happening as it should. For instance, when i connect any...

Resolved! Cisco / ERS4900 Command Differences Tell Us

(config)# no service udp-small-servers(config)# no service udp-small-servers(config)# no service finger(config)# no service pad(config)# no ip source-route(config)# no ip bootp server(config)# no ip domain-lookup(config)# no ip http server(config)# n...

Top Kudoed Authors

User

Count

3

2

2

2

1

GTM-P2G8KFN