Hello,we are trying to integrate ERS4950GTS-PWR+ / Software 7.8.1.055 via snmp v3 to XMC 8.5.0.169 with no luck.Our snmp v3 configuration is probably incomplete / wrong and maybe we are just too dim.Anyone out there who can post the config lines need...
Hi,
I've configured SNMP v3 correctly on an ERS4900 series switch, all is working fine. I'm able to send traps v3 too. But I would test to send Informs instead of Traps: so I've configured this with this command:
snmp-server host v3 inform
and n...
Hi all, After an blackout on saturday, I have a very confusing phenomenon on one of my ERS4850. The Switch has active ISIS Adjacencys, but I cannot ping the Mgmt IP Adress, nor can the Switch ping any device inside the Fabric. The Mgmt VLAN ISID is...
I have an existing stack of 2. I’ve verified that versions and licenses are identical. As far as configuration goes, are the configurations copied down onto the new member when it gets added to the stack or do I have to manually do it prior? my p...
