This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

5420M failing POE check with Fluke LinkIQ

5420M failing POE check with Fluke LinkIQ

Scott_J
New Contributor II

‎08-06-2024 11:01 AM

Attempting to figure out why POE is denied with an overload fault when doing a POE load test with a new LinkIQ. It works fine with a Linkrunner G2. 

show inline-power configuration ports 23

Port     Config    Operator     Priority  Detection                   Classification  Fast  Label
                   Limit
------   --------  -----------  --------  --------------------------  --------------  ----  --------------
23       Enabled   30000 mW     Low       802.3af-only                802.3bt-type4   N
debug poe show transfers latest
PoE Transfer Information:
Transfer time 1722964709.849, 08/06/2024 12:18:29
  [78085] TX   +0.000                    : 28 03 00 01 01 01 02 01 03 01 ff 34
          RX   +0.049                    : 28 03 00 61 01 61 02 61 03 61 ff b4
  [78086] TX   +0.020                    : 28 04 04 01 05 01 06 01 07 01 ff 45
          RX   +0.049                    : 28 04 04 61 05 61 06 61 07 61 ff c5
  [78087] TX   +0.020                    : 28 05 08 01 09 01 0a 01 0b 01 ff 56
          RX   +0.049                    : 28 05 08 61 09 61 0a 61 0b 61 ff d6
  [78088] TX   +0.020                    : 28 06 0c 01 0d 01 0e 01 0f 01 ff 67
          RX   +0.049                    : 28 06 0c 61 0d 61 0e 61 0f 61 ff e7
  [78089] TX   +0.020                    : 28 07 10 01 11 01 12 01 13 01 ff 78
          RX   +0.049                    : 28 07 10 61 11 61 12 61 13 61 ff f8
  [78090] TX   +0.020                    : 28 08 14 01 15 01 16 01 17 01 ff 89
          RX   +0.049                    : 28 08 14 61 15 61 16 31 17 61 ff d9
  [78091] TX   +0.020                    : 30 09 01 ff ff ff ff ff ff ff ff 32
          RX   +0.049                    : 30 09 01 00 00 00 00 00 c3 00 00 fd
  [78092] TX   +0.000                    : 30 0a 05 ff ff ff ff ff ff ff ff 37
          RX   +0.049                    : 30 0a 05 00 00 00 00 00 c3 00 00 02
Statistics:
  txOk        : 78092
  rxOk        : 78092
Port 23

Configured Admin State: enabled
Inline Power State    : searching
MIB Detect Status     : searching
Label                 :
Operator Limit        : 30000 milliwatts
PD Class              :
Max Allowed Power     : 0.0 W
Measured Power        : 0.0 W
Line Voltage          : 0.0 Volts
Current               : 0 mA
Fault Status          : None
Detailed Status       :
Priority              : low
Power Up Status       : 2-pair 15W
Powered Channels      : 0
Detection             : 802.3af-only
show inline-power info ports

Port    State           Class      Volts    Curr    Power     Fault
                                            (mA)   (Watts)
1       searching       ------      0.0       0      0.000    None
2       searching       ------      0.0       0      0.000    None
3       searching       ------      0.0       0      0.000    None
4       searching       ------      0.0       0      0.000    None
5       searching       ------      0.0       0      0.000    None
6       searching       ------      0.0       0      0.000    None
7       searching       ------      0.0       0      0.000    None
8       searching       ------      0.0       0      0.000    None
9       searching       ------      0.0       0      0.000    None
10      searching       ------      0.0       0      0.000    None
11      searching       ------      0.0       0      0.000    None
12      searching       ------      0.0       0      0.000    None
13      searching       ------      0.0       0      0.000    None
14      searching       ------      0.0       0      0.000    None
15      searching       ------      0.0       0      0.000    None
16      searching       ------      0.0       0      0.000    None
17      searching       ------      0.0       0      0.000    None
18      searching       ------      0.0       0      0.000    None
19      searching       ------      0.0       0      0.000    None
20      searching       ------      0.0       0      0.000    None
21      searching       ------      0.0       0      0.000    None
22      searching       ------      0.0       0      0.000    None
23      denied          ------      0.0       0      0.000    Overload
24      searching       ------      0.0       0      0.000    None

Is there a way to see the negotiation for POE that I'm missing? Because the switch says it's type 4 and the meter comes back at type 8 but shows type 3 when testing a Cisco switch. I'm curious if its a problem with lldp/cdp negotiation. 

0 Kudos
1 REPLY 1

hydr0gen
New Contributor II

‎09-05-2024 08:13 AM

Did you ever receive an answer to your question?  I have had some problems using the Fluke LinkIQ detecting power on certain ports.  I wasn't sure if there was a setting that needed to be changed to allow the Fluke to probe the port?  I haven't had your specific situation occur on any of my 5420M-48W-4YE's though.

0 Kudos
GTM-P2G8KFN