Advertise default gateway by OSPF

[JohanHendrikx]

I have 2 L3 switches in our netwerk. a x670G2 (16.1.2.14) and a x460 (16.1.2.14). Both switches are a vrrp set.

Both switches are configured for OSPF. Now I see that the default route of the x670G2 is advertised by OSPF and the default route of the x460 not.

how can i solve this ?

[Parthiban_V]

Hi Johan,
If you have used this CLI " enable ospf originate-default cost 1 type ase-type-1" then check if you have a default route configured in your x460.

Else use this CLI if you dont have any default route configured in x460.
"enable ospf originate-default always cost 1 type ase-type-1"

-Parthiban.V

[JohanHendrikx]

If I do a "show ospf lsdb detail summary-asb" at the x670 there is also no output ??

[Parthiban_V]

Yes that is the reason why the routes are not installed in x670g2. x460 is not generating the type 4 lsa . May be you can try a restart process in x460 and check or disable/enable the redistribution and check.

-Parthiban.

[JohanHendrikx]

The x460 is router id 10.2.144.253 and the x670 is router id 10.2.144.254.

there is no output by "show ospf lsdb detail summary-asb''