ExtremeSwitching (EXOS/Switch Engine) - Page 310 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Extreme X690 switch connection to HP ProCurve 8206zl Switch

Hello, Our customer have existing modular switch which is HP ProCurve 8206zl and it's up and running on their existing network. We implemented an isolated network called "AV network" that composed of Extreme Switches. Now the customer needs to inter...

Resolved! Connecting unmanaged Switch

Hi anybody, I connected an unmanaged industrial switch type "Weidmüller" to X440G2-48t-10G4, don't see any mac-addr., neither with tagged nor untagged port. How can I connect this switch correctly? Best Bernd

Possible Loop?

connected two X670-G2 via DAC back to back to form a stack, serving as a core for edge switches now from edge which are X440-G2 two 10G links (LAG) connected to each X6702 switch configured LAG at x670 and x440 X670 side enable sharing 1:1 groupi...

Resolved! Configure Traps for OSPF Neighbor Change on a XOS Switch

Hello, how can i configure a trap for an ospf neighbor change? Mib-View is added: #configure snmpv3 add mib-view "All" subtree 1.0/00 type included Other traps were reached by Netsight. Thanks, Alex

Resolved! Disable Redundant Port

Hello, Kindly note that I configured port 29 on my extreme switch as redundant to port 28 for testing. Command: configure port 28 redundant 29 link off My problem is that I'm not able to disable this feature. Is there any way to release port 29 and...

Top Kudoed Authors

User

Count

32

28

20

20

17

GTM-P2G8KFN