Advertise default gateway by OSPF

[JohanHendrikx]

I have 2 L3 switches in our netwerk. a x670G2 (16.1.2.14) and a x460 (16.1.2.14). Both switches are a vrrp set.

Both switches are configured for OSPF. Now I see that the default route of the x670G2 is advertised by OSPF and the default route of the x460 not.

how can i solve this ?

[Parthiban_V]

Hi Johan,
The default route got redistributed from x670g2 and hence you are seeing a default ospf route in x460. You can either configure a default route in x460 and redistribute into OSPF or without configuring default route use the cli "enable ospf originate-default always cost 1 type ase-type-1"
-Parthiban.V

[JohanHendrikx]

I did configure a default route and no I used the cli enable ospf export static cost 2 type ase-type-1

[Parthiban_V]

Have you configured default route in x670g2 and used the cli "enable ospf export static ..." ?

[JohanHendrikx]

both switches are configdured is area 0.0.0.0

[Parthiban_V]

both switches configured in which area ?