Hello,some days ago we have built up our first vpex enviroment with netlogin mac enabled ports and redundant controller bridges. Allthought the netlogin request is positively answered by the nac-server the port goes in unautheticated state.In the gta...
Hello,I have two X590-24x-1q-2c that should work as stack and two V400-48t-10GE4.Is it possible to have stacking + vpex support enabled at the same time?X590-24x-1q-2c.7 # enable vpexError: Cannot enable VPEX if stacking-support is enabledX590-24x-1q...
Hi, in a topology like the following where all the BPE are V400 with 48 portswhere only two of the four SFP+ ports are used for the MLAG and the cascade, may I use the other two available SFP+ port on each V400 for connect for example a cisco switch?...
I was trying to experiment with the EXOS version of what we do on our Cisco switches which is mac-address based security tied to a port. Sometimes we will use the following cisco commands on a port for example: switchport port-security maximum 2 s...
