ExtremeSwitching (EXOS/Switch Engine) - Page 160 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! is there a way to sh iparp for a vlan that the switch does not have an ip for?

I love the sh iparp command, lightyears ahead of what we had on our older cisco 3750 switches. Heres a scenerio for you, lets say you have a vlan in an access switch stack of 5520 EXOS switches. The vlan on this access switch does not have an IP ad...

QOS

Hi all, I’d like some clarification if at all possible with our QoS setup on our EXOS switches. They’re running different models of G1 and G2 but the QoS is the same across all.We need to prioritize our VoIP traffic across the LAN and the QoS was or...

Resolved! Issue enabling 10 Gig SFP+ with 40G Module Adapter in X590

I have a problem with getting a 10G SFP+ Adapter online. The SFP+ is plugged in a 40Gig Adapter. When i check the port in CLI Mode everything seems ok, but i can t get a link to the other switch.This occurs only in the X590 port 25-28, it works fine ...

Resolved! Port isolation

I would like to isolate some of my clients from other clients in the same VLAN. I need each isolated client to be able to:Receive DHCP from DHCP serverAccess the internetBut I need each isolated client not to be able to talk in any way to the other i...

x690 40Gbe and 100Gbe ports

I have a pair of x690 switches. The last 6 ports is configured with the following template: configure ports partition-template 2x100G-and-4x40G I want to use the 40Gbe DAC fan out to four 10Gbe SFP+ ports on the four 40Gbe ports. I configure port 4...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN