ExtremeSwitching (EXOS/Switch Engine) - Page 170 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Radius and Local account EXOS Switch log in

I have set up our X460 G2 switches with RADIUS login through our NAC. This works well however is it possible to also have the local accounts available? XMC uses a local account to login and if the NAC were to fail local account login we be needed. ...

Resolved! To stack or not

Hi everybody. I’m designing an environment with two X440-G2 edge switches and two X620-16t rack switches for servers.At first I thought that I’d create two separate stacks and connect the two with dual 10Gb links and LACP. But looks like I can also c...

Snmp oid for broadcast traffic

Hi exos experts,I’d like to graph broadcast and multicast traffic per port with snmp/zabbix for loop detection.data is present with sh port statistics* Slot-1 B05-01.2 # sh port statistics Port Statistics ...

Resolved! Erro:STP.InBPDU.Drop since replacing a Cisco switch for Extreme

In our core we have 2 X690 stacks running VRRP between them and we also MLAG between them to uplink to other closets. We just replaced a stack of Cisco 3750x switches in a 3rd floor network closet with two Extreme 5520 running EXOS 31.1.1.3. Connect...

Is the stacking disable command on master switch result in config loss

We have 2 ×460-g2 connected in stack. One of the switch went faulty now. We received new switch against RMA and we are going to add it back to the stack.Now the issue is by mistake we disabled stacking on working x460-g2 switch. So is the config for...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN