ExtremeSwitching (EXOS/Switch Engine) - Page 189 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Creating a network

Hi all, i have two 210 switches , a fortigate 100E device , nine AP7632i and an astTECS IPPBX . i would like to create a network with four vlans in which one is for controlling all other vlans, one is for guest wifi , one is for ippbx and one is for...

Rate-limit in exos blakdiomand 8806 with emistp

Dear Sir, I have Blackdiomand 8806 Exos switch (Image : ExtremeXOS version 11.6.1.9 v1161b9 by release-manager on Wed Nov 29 23:20:09 PST 2006 BootROM : 1.0.1.11) I need to apply rate limit for broadcast st...

Port congestion, acl drop

Hi, Are packets droped by ACL counting to “packet drop” in show port congestion ?

Login failed through SNMPv1/v2c

I periodically see these entries in my logs: SNMP.Master: Slot-1: Login failed through SNMPv1/v2c - bad community name (x.x.x.x) This isn’t an Extreme issue - that’s just where I am seeing the messages. SNMP is configured correctly and the devices...

Can we configure qos priority on untagged traffic

I try to configure qos profile configure for per c-vid in untagged traffic, but not success. Is there any way to configure qos profile for untagged traffic in per c-vid. I write policy as below and appply to the ingress interface as below. en...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN