I don’t know if this has been answered but I am trying to set up my switch to send me an email when our MAC-locking learn limit has been exceeded. I would also like to see it in the OneView alarms but it doesn’t show up on there either. Our SNMP Noti...
I have a Cisco Switch as a Core, and I have 3 Stack of X450-G2 each ones, I have a lot of topology Changes, hundreds per day. The topology it’s a star so I have 1 port from the cisco to 1 port to each one of my stacks.Cisco is configure with PVST+, s...
We typically deploy our switches with LLDP MED configured to advertise DSCP 46 markings as the suggested value to network connected phones, etc. We follow the design example set in one of the old reference architectures and it seems to work pretty we...
hi currently we have two BD SW01( VRRP backup ) SW02( VRRP Master) i need to switch current (SW02 VRRP MASTER ) to SW01. so that SW01 become VRRP MASTER and SW02 Become Backup. BR SoSA
Hi, Some of our X440G2 switches show high temperatures (around 90°C) Fans seem to work. So when looking at CPU usage, I’ve noticed the HAL process has a max usage of 99,9% and a constant 20%. After reading this article I was wondering if the bootROM...
