ExtremeSwitching (EXOS/Switch Engine) - Page 220 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Actualizar licenacia a equipo cluster in Stack

Greetings, I would like to know, if I made a stack between 2 X690 team both with edge license and once the stacking done I decide to update the cluster in stack to the core license, 1 core license per team is required or a license can be applied only...

How to configure dot1x auth with NAC and AD

exos switch ip:10.10.1.254 nac ip:10.10.1.201 ad ip:10.10.1.204 exos config: Netlogin enable netlogin dot1x mac configure netlogin authentication protocol-order dot1x mac web-based enable netlogin ports 3-28 dot1x enable netlogin ports 3-28 mac conf...

Resolved! XOS Fabric attach with Policy - I-SID remains on switch after disconnect

Hi Guys, the advantage of Fabric Attach is that you don't have to configure your VLANS on the uplinks AND that if there is no I-SID, no VLAN will be active on the uplink, thus making your broadcast domain smaller. All good. Now lets get Extreme Co...

Port-Specific VLAN Tag alternative on X620

Hi, I am currently migrating from X670 (G1) series to X620 switches only there is one problem. Currently port specific port specific tags are being used which aren’t available on X620. The situation is that on a few ports (2) there are multiple vl...

My core is not learning the new routes from 670 in distribution layer

Running 16.2.4.5 I joined a 670 to an X8 core and while the 670 learned all the ospf routes for the rest of my environment the X8 did not learn the new routes (vlans) from the 670 or redistribute, any thoughts?

Top Kudoed Authors

User

Count

27

20

16

16

12

GTM-P2G8KFN