Extreme switch is under TACACS authentication and I could not move from execution level (>) to configuration level(#) . see below commands and error Slot-1 NEOS-PS-FWswitch.6 > show configuration This user does not have permissions for this command...
I'm new to Network Administration but I'm working on configuring ACL's to allow two subnets to communicate with each other across two sites. Isolation needs to exist so hosts within the subnets can only communicate to each other and the internet. As...
Hi Guys, I've never applied and access list on Extreme Networks switches. I need to know how to apply a upload a ACL to a Black Daimond. I have about 10 VLANs I Need need: 1.- Permit all access on the same VLAN 2.- Permit all access to some serv...
I can serial into the x440g2 w/Exos 30.3 - no problem - appears to be set for 9600,n,8,1. I would like to be using 115.200K. I did not see this covered in the command reference guide. Maybe I just missed it - but anyways, is it possible to up the ba...
Hello, Here is a simple schema of my network architecture : We have two ospf zone, backbone which announce all company sites, and new zone which will announce site subnets to Edge. I have created a 2nd area (0.0.0.10). Two equipements are part of ...
