ExtremeSwitching (EXOS/Switch Engine) - Page 260 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How can I test the memory on X460-G2?

Hi Everyone, I have a problem with my X460-G2 switch. Sometimes it doesn`t save the config, sometimes it doesn`t show configuration. Only reboot helps me with this problems. Also it takes a lot of time to create or delete a VLAN on it. I have two mo...

Temperature on X440-G2-24x

Does anyone notice that "show temperature" command on X440-G2-24x shows too high temperature. Some of the loaded with MGBICs switches can reach 90 Celsius, which I think is not acceptable. Firmware used in the switches is SummitX-22.3.1.4.

Resolved! x450-g2 stack ports to 3rd party

I am newer to the exos line and I am curious if the QSFP form factor ports in the rear of the x450-g2 can be used to connect with standard QSFP ports to non-exos switch with QSFP ? thanks, Jake

Resolved! 802.1x issues

Hey everyone! Since Microsoft allowed the Hyper-V switches to transfer EAPOL packets I tried to make our switches more secure by implementing 802.1x authentication for the ports. My idea is the next: Someone plugs their computer to one of the swit...

Resolved! Question about X460G2-48p Extreme Stack switches

Hi all, I need to clarify a question regarding Extreme stack with ISC cable. let's say we have two X460G2 switches in a stack. One is Master and the second is Backup or Standby. If we have end devices plugged in to the switches which are not maste...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN