exos switch ip:10.10.1.254 nac ip:10.10.1.201 ad ip:10.10.1.204 exos config: Netlogin enable netlogin dot1x mac configure netlogin authentication protocol-order dot1x mac web-based enable netlogin ports 3-28 dot1x enable netlogin ports 3-28 mac conf...
Hi Guys, the advantage of Fabric Attach is that you don't have to configure your VLANS on the uplinks AND that if there is no I-SID, no VLAN will be active on the uplink, thus making your broadcast domain smaller. All good. Now lets get Extreme Co...
Hi, I am currently migrating from X670 (G1) series to X620 switches only there is one problem. Currently port specific port specific tags are being used which aren’t available on X620. The situation is that on a few ports (2) there are multiple vl...
Running 16.2.4.5 I joined a 670 to an X8 core and while the 670 learned all the ospf routes for the rest of my environment the X8 did not learn the new routes (vlans) from the 670 or redistribute, any thoughts?
We just bought a new Black Diamond 8810 (not my decision). I need connect it to the old 8810 and setup VRRP. My question is: How do I physical connect the two? Should I use the ports on the MSM module? Do they make a module just for this purpose?
