ExtremeSwitching (EXOS/Switch Engine) - Page 272 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Temperature on X440-G2-24x

Does anyone notice that "show temperature" command on X440-G2-24x shows too high temperature. Some of the loaded with MGBICs switches can reach 90 Celsius, which I think is not acceptable. Firmware used in the switches is SummitX-22.3.1.4.

Resolved! x450-g2 stack ports to 3rd party

I am newer to the exos line and I am curious if the QSFP form factor ports in the rear of the x450-g2 can be used to connect with standard QSFP ports to non-exos switch with QSFP ? thanks, Jake

Resolved! 802.1x issues

Hey everyone! Since Microsoft allowed the Hyper-V switches to transfer EAPOL packets I tried to make our switches more secure by implementing 802.1x authentication for the ports. My idea is the next: Someone plugs their computer to one of the swit...

Resolved! Question about X460G2-48p Extreme Stack switches

Hi all, I need to clarify a question regarding Extreme stack with ISC cable. let's say we have two X460G2 switches in a stack. One is Master and the second is Backup or Standby. If we have end devices plugged in to the switches which are not maste...

Switch Hardware

Posting this question here because the 'Switching Routing' sub forum didn't return any replies. We have 2 switch models (x460, x670) in our environment that are running 10Gb SFP+. My one problem I have with them is that these are fairly large in s...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN