Hi Community I am playing with some Fabric kit in my lab. Below is the diagram of my fabric: The question I have is regarding the redundant links (Indicated in Red). My initial thought was that these links would become active and the backbone vla...
Hi I am currently working in the Auto Lab in SKKU. I have a problem sending 802.1q frames to the board via Summit x440 - 8t switch. From PC, I broadcasted a frame to the switch. Even I configured the VLAN by creating a VLAN and assigning port 1 which...
I have a number of POE devices that operate at 10BT (yes 10 megabyte) that we plan to deploy. In my summit switches they are getting POE, but not linking the data port. The specs for a summit 450 show that 10BT is supported.... Is there anythi...
Hello, By reading this article http://packetpushers.net/fat-or-entropy-label/ I've been wondering if Extreme could implement something like that (FAT Label)? Some l2vpn circuit are getting 10Gbps and the outer interfaces port channels aren't handli...
Cisco command "snmp-server trap-source GigabitEthernet1 / 0/1" What is the configuration? snmp-server trap-source To change GigabitEthernet1 / 0/1 to an extreme command Please give an example of what command you should use.
