X250e-24p XOS version 12.0.3.16 Command "show fans" responds with: X250e-24p.1 # show fans FanTray information: State: Empty I have this on 11 different units, all the same model and software version. (I have other units of the s...
Hi, im having a virtual lab, where i try to practice MLAG, the topology is as in the diagram now i have a problem and some questions regarding MLAGmy problem that MLAG doesnt come up, i have followed the following on both EXOS1 and EXOS2 switches E...
I have created a GRE tunnel between a 460g2 and another device. I have configured a /31 on the GRE tunnel. I have enabled forwarding on the GRE tunnel. I am only able to ping the remote side of the tunnel from the 460 itself. I can ping using its IP...
When I mirror several vLANs toward a port, I can see all broadcast traffic but no unicast traffic. It's a little bit like if the monitoring port had been inclded in the vLANs mirrored but no mirroring happen at all... Is there some configuration I mi...
I am looking at a configuration provided to me by a client on an existing Extreme switch. They are needing me to translate this configuration to a Cisco configuration. The configuration from the Extreme switch shows: configure mstp region 00049635f7...
